PDMS Lists

2011/10/25 20:55


 - Select elements to be treated in Members & Draw List

- Select Utilities > Lists...

- Add elements to be treated Add > List… > Key in list name

- Select Add > Selection…

- Key in Selection- and with Rule- fields (see pictures 2 and 3)

- Apply (all applicable elements show up in Lists/Collections- form)

- Key in action and press Action- button (see picture 1)

- Select Remove > All

- Key in “savework” in Command Window

- Key in “unclaim all” in Command Window

Unknown Object

Picture 1, Material to be changed to /S275JR

Picture 2, Sections, panels and generic sections to be searched

Picture 3, Sections position (U) greater than 2100 and less than 3100 to be searched

Picture 4, Sections with specification to be searched

Picture 5, Sections with justification TOS to be searched. (NEQ = not equal)

Picture 6, Plates with thickness 20 to be searched

Picture 7, Plates with thickness not equal 20 to be searched

Picture 8, CE to be removed and added with colour blue

Picture 9, Sections matching with “BRACING” to be searched

Picture 10, Sections matching with “/BS-SPEC-610” to be searched

Picture 11, Direction start/end angle to be changed perpendicular

Picture 12, Sub frames without members to be searched

Picture 13, Sub frames without members to be deleted

Article written by Marko Ervonmaa