CAD/CAM | 2011/10/25 20:45
To be able to login to PDMS, user needs to select 1) Project, 2) Facility, 3) Sub Facility, 4) User Role, 5) Module (Design, Draft, etc.) and 6) Databanks (Design, Draft, etc.), see picture 1 below.
CAD/CAM | 2011/10/25 20:35
The purpose of this checklist is to provide general guidelines to check a drawing in Draft. Some of the checks are on-going, some of should be performed once a week or when drawing is finished and is ready to be issued.
1. Check references of drawing, sheet and view levels
- Use “Utilities > Reports”- function to list element’s IDLNAME and IDLX
2. Check dimensions are referenced to the correct elements
- Use “Utilities > Reports”- function to list element’s DDNAME
CAD/CAM | 2011/10/25 20:15
The following set of guides are created by Marko Envormaa to help him understand the differences between the modeling and drafting concepts and between Tribon Hull and Vantage PDMS Structural design while using it as a structural designer on both types, onshore and offshore projects. The author has kindly agree to share these documents with all who are interesting in his findings:
"My very short PDMS experience is based on using the last 12 months VANTAGE PDMS v11.5 Structural Design- and Draft- modules on two onshore- and two offshore- projects as a Structural Designer.
CAD/CAM | 2011/10/25 20:15
The purpose of this checklist is to provide general guidelines to check a module. Some of the checks are on-going, some of should be performed once a week or when the module is finished and PI is ready to be started.
1. Check section specifications and ploo heights
- Use “Utilities > Lists”- function to select elements
2. Check positions
- Use “Utilities > Reports”- function to select elements
- Position of SITE/ZONE/STRU has to be 0,0,0 WRT WORLD
CAD/CAM | 2011/10/16 21:35
Some simple SQL queries that can help new users start faster.
Applicable to: SmartPlant 3D , SmartMarine 3D and Smart 3D design systems.
Create equipment list including equimpment description. The information is stored in two different tables in projects' (plants' ) database - XXXX_MDB. The table view JNamedItem contain all items names and their IDs - oid. The equipment data is read from JEquipment. Table view JEquipment has information for the equipment ID but not for its name.
CAD/CAM | 2011/10/16 21:15
The scope of this document is to provide a simplified comparison based on PDMS Draft and Tribon Drafting.
The purpose of this document is to give an overview of two 3D- drafting systems and underline the differences between them.
TUTORIALS | 2017/10/05 05:45
CompilationWhen compiling, VS.NET automatically creates the required assemblies and resource files.